Section 4 - Configuration
Motion detection allows you to define specific areas that will be monitored for motion by your camera. These settings will be used to trigger
snapshots or recordings. Refer to
Motion
Click to enable the motion detection feature of your camera.
Detection:
Select Always if you want to have motion detection always enabled,
Time:
or click Schedule to select day(s) and enter a time period.
Sensitivity:
Select a number representing the measurable difference between
sequential images required to determine whether there is motion. (A
higher number makes it easier for motion to be detected.)
Detection
Use your mouse to click on the blocks representing the areas that you
Areas:
would like to monitor for motion.
Click Save Settings.
D-Link DCS-5010L User Manual
Motion Detection
"Mail" on page 38
and
"FTP" on page 40
for more details.
37
37