Ftp - D-Link DCS-933L Cloud Camera 1150 User Manual

Section 3 - Confguration
This section allows you to con gure your camera to send snapshots and video clips to an FTP server.
Host Name:
Enter the IP address o the FTP server that you will be connecting to.
Port: Enter the port o the FTP server that you will be connecting to. The de ault
is 21.
User Name:
Enter the user name o your FTP server account.
Password:
Enter the password o your FTP server account.
Path: Enter the destination path/ older to save les to on the FTP server.
Passive Mode:
Enabling passive mode may help you reach your FTP server i your camera
is behind a router protected by a rewall.
Enable the Enabling this will allow snapshots to be uploaded in di erent ways:
uploading o
images to an
• Choosing Always will upload snapshots continuously based on
FTP server:
the Image Frequency speci ied.
• Choosing Schedule will allow you to schedule when to start and
stop the uploading o snapshots.
• Select Motion/Sound Detection i you would like the camera to
upload images only when motion or sound is detected.
Image
Select the requency you would like or your images to be taken and
Frequency:
uploaded. You can choose to upload by rames per second, or by seconds
per rame.
Choose a base le name or your snapshots.
Base File Name:
D-Link DCS-933L User Manual

FTP

35 35