Ftp - D-Link DCS-933L User Manual

Section 3 - Coniguration
This section allows you to conigure your camera to send snapshots and video clips to an FTP server.
Host Name:
Enter the IP address of the FTP server that you will be connecting to.
Port:
Enter the port of the FTP server that you will be connecting to.
User Name:
Enter the user name of your FTP server account.
Password:
Enter the password of your FTP server account.
Path:
Enter the destination path/folder to save iles to on the FTP server.
Passive Mode:
Enabling passive mode may help you reach your FTP server if your camera
is behind a router protected by a irewall.
Enable the
Enabling this will allow snapshots to be uploaded in diferent ways:
uploading of
images to an
• Choosing Always will upload snapshots continuously based on
FTP server:
the Image Frequency specified.
• Choosing Schedule will allow you to schedule when to start and
stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like the camera to
upload images only when motion or sound is detected.
Image
Set how frequently you want images to be taken and uploaded. You can
Frequency:
choose to upload by frames per second, or by seconds per frame.
Base File Name:
Set what you want the base ile name to be for your snapshots.
D-Link DCS-933L User Manual

FTP

35 35