Wireless Setup - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure the wireless settings on your camera.
Enable Check this box to allow your camera to connect to your network
Wireless: wirelessly. Uncheck it if you want to connect to your network
using an Ethernet cable.
SSID: Enter the Wi-Fi network name (SSID) of the wireless network
you want to connect the camera to. You can also click the Site
Survey button to select from a list of available networks.
When you click Site Survey, a list of wireless networks detected
Site Survey:
by the camera will be listed. To connect to a network, click the
radio button in the first column and click Select. The SSID field
should be filled in with the network name. Select the security
mode and then enter the Wi-Fi password in the "Pre-Shared
Key" box.
Wireless Select the wireless security mode used by your wireless
network. If you select WEP or WPA-PSK/WPA2-PSK, enter the
Security
Mode: Wi-Fi password for your wireless network in the text box. Select
None if your wireless network is not secure.
Save Settings: Click to connect to your wireless network.
D-Link DCS-5030L User Manual

Wireless Setup

25 25