Wireless Setup - D-Link DCS-930L User Manual

Section 3 - Configuration
This section allows you to setup and configure the wireless settings on your camera.
SSID:
Service Set Identifier, an identifier for your wireless network.
Channel: The default setting is channel 6. Select the same channel that is using by other
wireless devices within your network. When there is interference from the
wireless networks that overlap with one another, you may change the channel
to obtain maximum performance for your connection.
Connection Use Infrastructure if you are connecting your camera to a wireless router or
Mode: access point. Use Ad-Hoc if you are wirelessly connecting to your PC without a
wireless router or access point.
Site Survey: Click this to scan for available wireless networks to connect to. You will then be
able to select a wireless network to use from a list.
Wireless Security For security, there are three choices; None, WEP, and WPA-PSK / WPA2-PSK.
Mode: Select the same encryption method that is being used by your wireless device/
router.
WEP:
If you choose WEP as your wireless security mode, enter the key(password) for
your wireless network.
WPA-PSK /
If you choose WPA-PSK/WPA2-PSK as your wireless security mode, enter the
WPA2-PSK
key(password) for your wireless network.
Settings:
D-Link DCS-930L User Manual

Wireless Setup

27