Processors - xFusion Digital Technologies FusionServer G5500 V6 Manual

FusionServer G5500 V6 Server
Technical White Paper
Name
Serial port
VGA port
USB port
PSU socket

5.3 Processors

⚫
⚫
2023-02-14
Type
RJ45
DB15
USB 3.0
-
The server supports one or two processors.
If only one processor is required, install it in socket CPU 1.
Quantity Description
The management network port is a
GE port that supports 100 Mbit/s
and 1000 Mbit/s auto-negotiation.
1 A port used for debugging. By
default, it serves as the OS
serial port. You can also set it
as the iBMC serial port on the
iBMC CLI.
NOTE
The port is a 3-wire serial
communication port, and its default
baud rate is 115,200 bit/s.
1 Used to connect a display
terminal, such as a monitor or
KVM.
2 Used to connect to a USB 3.0
device.
NOTICE
⚫
⚫
⚫
2 Used to connect to a power
distribution unit (PDU) through
a power cable. You can select
the PSUs as required.
NOTE
When determining the PSUs,
ensure that the rated power of the
PSUs is greater than that of the
server.
5 Hardware Description
The maximum current is 1.3 A
for an external USB device.
Before connecting an external
USB device, ensure that the
USB device functions properly;
otherwise, it may adversely
impact the server.
The USB 3.0 port can be used
to supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is
required.
27