Processors - xFusion Digital Technologies FusionServer G8600 V7 Manual

FusionServer G8600 V7 Server
Technical White Paper
Name
Serial port
VGA port
USB port
PSU socket

5.3 Processors

●
●
●
Issue 03 (2023-09-15)
Type
RJ45
DB15
USB 3.0
-
Two processors.
Processors used in one server must be of the same model.
For details about the optional components, consult your local sales
representative or see "OS and Parts Compatibility" in the
Checker.
Copyright © xFusion Digital Technologies Co., Ltd.
Quantity Description
1 A port used for debugging. By
default, it serves as the OS
serial port. You can also set it
as the iBMC serial port on the
iBMC CLI.
NOTE
The port is a 3-wire serial
communication port, and its
default baud rate is 115,200 bit/s.
1 Used to connect a display
terminal, such as a monitor or
KVM.
2 Used to connect to a USB 3.0
device.
NOTICE
● Before connecting an external
● The USB 3.0 port can be used
14 Used to connect to a power
distribution unit (PDU) through
a power cable. You can select
the PSUs as required.
NOTE
When determining the PSUs,
ensure that the rated power of the
PSUs is greater than that of the
server.
5 Hardware Description
USB device, ensure that the
USB device functions properly;
otherwise, it may adversely
impact the server.
to supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is
required.
Compatibility
24