Environmental Specifications - xFusion Digital Technologies FusionServer G5500 V6 Manual

Table of Contents

Advertisement

FusionServer G5500 V6 Server
Technical White Paper

6.2 Environmental Specifications

Table 6-2 Environmental specifications
Category
Temperature
Relative humidity
(non-condensing)
Air volume
Operating altitude
Corrosive gaseous
contaminant
2023-02-14
Specifications
Operating temperature: 5° C to 35° C (41° F to 95 ° F)
(ASHRAE Classes A1 to A4 compliant)
Storage temperature (within three months): –30° C to
+60° C (–22° F to +140° F)
Storage temperature (within six months): –15° C to
+45° C (5° F to 113° F)
Storage temperature (within one year): –10° C to
+35° C (14° F to 95° F)
Maximum rate of temperature change: 20º C (36º F) per
hour, and 5º C (9º F) per 15 minutes
NOTE
The highest operating temperature varies depending on the
server configuration. For details, see the A.3 Operating
Temperature Limitations.
Operating humidity: 8% to 90%
Storage humidity (within three months): 8% to 85%
Storage humidity (within six months): 8% to 80%
Storage humidity (within one year): 20% to 75%
Maximum rate of humidity change: 20% per hour
≥ 330 cubic feet per minute (CFM)
≤ 3050 m (10006.56 ft)
When the server configuration complies with ASHRAE
Classes A1 and A2 and the altitude is above 900 m
(2952.76 ft), the highest operating temperature
decreases by 1° C (1.8° F) for every increase of 300 m
(984.24 ft).
When the server configuration complies with ASHRAE
Class A3 and the altitude is above 900 m (2952.76 ft),
the highest operating temperature decreases by 1° C
(1.8° F) for every increase of 175 m (574.14 ft).
When the server configuration complies with ASHRAE
Class A4 and the altitude is above 900 m (2952.76 ft),
the highest operating temperature decreases by 1° C
(1.8° F) for every increase of 125 m (410.1 ft).
HDDs cannot be used at an altitude of over 3050 m
(10006.56 ft).
Maximum growth rate of the corrosion product thickness:
Copper corrosion rate test: 300 Å/month (meeting
level G1 requirements of the ANSI/ISA-71.04-2013
standard on gaseous corrosion)
Silver corrosion rate test: 200 Å/month
6 Product Specifications
65

Advertisement

Table of Contents
loading

Table of Contents