Cisco 7800 Series Accessories Manual page 29

Headsets
Table 15: Cisco Headset 730 Buttons
Callout
Number
1
2
3
4
Name
Skip music track
This is the right and left of the right cup
face.
AMB and NC button
This button is located on the back of the
right cup.
Pause and Play
This is the center of the right cup and is
marked with a dot.
Presence LED
This LED is located on the face of the
cup on both the right and left cup.
Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager
Cisco Headset 730 Buttons and Hardware
Description
Skip forward and backward through music tracks.
Only available if you have the headset paired to a
device that can play music.
Three position switch:
• AMB: Slide to the top to enable ambient mode.
• No ambient mode or noise cancellation: Middle
position.
• NC: Slide to the bottom to enable noise
cancellation.
Press to play or to pause your music. Only available
if you have the headset paired to a device that can
play music.
Displays red when you are on a call or if you have
pressed the Mute button on the headset when you
aren't on a call.
21