Quick Guide To Basic System Functions - Honeywell Ademco Vista-48 series User Manual

Quick Guide to Basic System Functions

Quick Guide to Basic System Functions
Quick Guide to Basic System Functions Quick Guide to Basic System Functions
FUNCTION PROCEDURE
Press READY key.
Check Zones
Arm System Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY (Internal),
MAXIMUM, INSTANT)
Quick Arm Press #. Press arming key desired:
(if programmed) (AWAY, STAY, MAXIMUM, INSTANT)
Bypass Zone(s) Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Quick Bypass Enter code. Press BYPASS key + [#].
(if programmed)
Silence Sounders
Burglary:
Enter code. Press OFF key.
Fire:
Press OFF key.
"Check":
Press any key.
Disarm System Enter code. Press OFF key.
Clear Alarm Memory
After disarming, enter code again.
Press OFF key again.
Duress (if active
Arm or disarm "normally", but
and connected to
use your 4-digit Duress code to do so.
Central Station)
Press key [A], [B], or [C] for at least 2
Panic Alarms
(as programmed) seconds or briefly press assigned key pair.
Chime Mode To turn ON or OFF: Enter code. Press
CHIME key.
Test Mode To turn ON: Enter code. Press TEST + [0].
To turn OFF: Enter code. Press OFF key.
Phone Access
Consult Phone Access User's Guide that
if applicable
accompanies the Phone Module.
– 16 –
COMMENTS
View faulted zones when system not ready.
Arms system in mode selected.
Arms system in mode selected, quickly and without use of a
code.
Bypassed zones are unprotected and will not cause an alarm
if violated.
Bypasses all faulted zones automatically.
Also disarms system. Memory of alarm remains until
cleared.
Memory of Alarm remains until cleared.
Determine cause.
Also silences sounders. Memory of alarm remains until
cleared.
Keypad beeps rapidly on entry if alarm has occurred while
absent. Alarm display will remain upon disarming until
cleared.
Performs desired action and sends silent alarm to Central
Station.
See the Panic Keys section for emergency functions
programmed for your system. Note: Keys "A", "B", and "C"
may have been programmed for other functions.
The keypad will sound if selected doors or windows are
violated while system is disarmed and chime mode is ON.
Tests alarm sounder and allows sensors to be tested.
Permits system access remotely, via multifrequency phone.