Quick Guide To Basic System Functions - Honeywell ADEMCO VISTA-12A User Manual

Quick Guide to Basic System Functions

FUNCTION
Check Zones
Arm System
Quick Arm
(if programmed)
Bypass Zone(s)
Quick Bypass
(if programmed)
Silence Sounders
Burglary:
Fire:
"Check":
Disarm System
Clear Alarm Memory
Duress (if active
and connected to
Central Station)
Panic Alarms
(as programmed)
Chime Mode
Test Mode
Phone Access
if applicable
– 26 –
PROCEDURE
Press READY key.
Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY (Internal),
MAXIMUM, INSTANT)
Press #. Press arming key desired:
(AWAY, STAY, MAXIMUM, INSTANT)
Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Enter code. Press BYPASS key + [#].
Enter code. Press OFF key.
Press OFF key.
Press any key.
Enter code. Press OFF key.
After disarming, enter code again.
Press OFF key again.
Arm or disarm "normally", but
use your 4-digit Duress code to do so.
Press key [A], [B], or [C] for at least 2
seconds or briefly press assigned key pair.
To turn ON or OFF: Enter code. Press
CHIME key.
To turn ON: Enter code. Press TEST + [0].
To turn OFF: Enter code. Press OFF key.
Consult Phone Access User's Guide that
accompanies the Phone Module.
COMMENTS
View faulted zones when system not
ready.
Arms system in mode selected.
Arms system in mode selected, quickly
and without use of a code.
Bypassed zones are unprotected and will
not cause an alarm if violated.
Bypasses all faulted zones automatically.
Also disarms system. Memory of alarm
remains until cleared.
Memory of Alarm remains until cleared.
Determine cause.
Also silences sounders. Memory of alarm
remains until cleared.
Keypad beeps rapidly on entry if alarm
has occurred while absent. Alarm display
will remain upon disarming until
cleared.
Performs desired action and sends silent
alarm to Central Station.
See the Panic Keys section for emergency
functions programmed for your system.
Note: Keys "A", "B", and "C" may have
been programmed for other functions.
The keypad will sound if selected doors
or windows are violated while system is
disarmed and chime mode is ON.
Tests alarm sounder and allows sensors
to be tested.
Permits system access remotely, via
multifrequency phone.