Supermicro SuperWorkstation SYS-5039A-i User Manual page 48

SuperWorkstation SYS-5039A-i User's Manual
Manufacturer Mode Select
Close pin 2 and pin 3 of jumper JPME2 to bypass SPI flash security and force the system
to operate in the manufacturer mode, which will allow the user to flash the system firmware
from a host server for system setting modifications. The default setting is Normal.
Audio Enable
Use JPAC1 to enable or disable the onboard audio support.
Manufacturer Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturer Mode
Audio Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
48