Supermicro SuperWorkstation SYS-5039A-i User Manual page 26

SuperWorkstation SYS-5039A-i User's Manual
Installing Memory
1. Remove power from the system as described in Section 3.1.
2. Starting with the slot in the order described previously, push the release tab outward to
unlock it.
3. Align the key of the DIMM with the receptive point on the memory slot and with your
thumbs on both ends of the module, press it straight down into the slot until the module
snaps into place.
4. Press the release tab to the locked position to secure the DIMM module into the slot.
5. Repeat the procedure for the remaining DIMM modules in the order detailed in the
previous section.
To remove a DIMM module, unlock the release tabs then pull the module from the slot.
Notch
Release Tab
26
Press both notches straight
down into the memory slot.