Table of Contents
Advertisement
TROUBLESHOOTING
POWER DOWN
DO NOT remove all power without following the steps below. In the event of needing to
move the panel from one location to another it is safe to unplug the power supply while
leaving the battery plugged in.
1. From the Configuration Menu select "Power Down"
2. Toggle on "Yes, I want to perform this action"
3. Select "Power Down"
4. Wait for panel LED to turn off
5. Disconnect the power
IMPORTANT: Failure to perform these steps in the
proper sequence may result in data corruption and/or
panel failure.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
118
OF
158
FIND IT
Advertisement
Table of Contents
Need help?
Do you have a question about the IQ4 NS and is the answer not in the manual?