Johnson Controls IQ4 NS Installation Manual page 39

SENSOR GROUPS
SMOKE DETECTOR/HEAT
GROUP
26
SMOKE-M
GROUP
26 Smoke-Heat
CO DETECTOR
GROUP
34
*345 MHz smoke sensors will have the option to change the "Loop" number
to 1, 2 or 3. This will allow the sensor to be programmed twice as 2 different
NAME SUPERVISED
Smoke-Heat
NAME SUPERVISED
NAME SUPERVISED
CO
QOLSYS CONFIDENTIAL AND PROPRIETARY
Y Triggers an alarm when sensor detects smoke/rapid rise in heat
Triggers an alarm when sensor detects smoke or a rapid rise of heat.
Y
Use ONLY with Qolsys multi-sensor smoke (QS5110-840)
*345 MHz carbon monoxide sensors can be programmed as "Loop" 1 only
Y Triggers an alarm when sensor detects Carbon Monoxide
PAGE 39 OF 158
zones where supported by the device
SCENARIO
SCENARIO
SCENARIO