Table of Contents
Advertisement
PROGRAMMING
CONNECTING IQ INSTALLER TO IQ4 NS
Use the IQ Installer Interface to connect to IQ4 NS to complete system setup. To connect, complete the following steps:
1. Open IQ Installer, tap Start on the phone screen to begin. Tap Scan QR Code, then position your phone and scan the
QR label on the back of the panel or the side of the box. Tap Continue.
2. Press the Power Button twice within 3 seconds.
3. The Status LED will turn
solid Blue. Tap Next on the
screen.
4. Enter the default Installer
(1111) or Dealer (2222) code
to connect.
5. When prompted, change
the default code to a new
installer code.
6. Select Dashboard, then tap
Launch Wizard.
1
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
18
OF
158
3
Press
Power Button
twice within
3 seconds
2
Advertisement
Table of Contents
Need help?
Do you have a question about the IQ4 NS and is the answer not in the manual?