Note: This unit must be powered by a 24-hour, 120 V, 60 Hz or 230-240 VAC, 50 Hz circuit (as appropriate for your country) that cannot be turned off by

a switch, dimmer, or Residual Current Device. Failure to provide this circuit may prevent it from providing constant protection. Power supply shall be

located within same room as control unit.

Connect power supply.

WARNING!

Use included 7v⎓DC

If using the provided cable, the "striped" wire is (+)

Note: Power supply shall be located within same room as control unit

Power Supply ONLY

QOLSYS CONFIDENTIAL AND PROPRIETARY

PAGE

Press and hold the power button on

the right side of the panel for 3

seconds to power up.