Table of Contents
Advertisement
SQVEx 05.2
SQVEx 14.2/ SQRVEx 05.2
ACVExC 01.2 Non-Intrusive Modbus RTU
Select unit
Display in percent
8.2.2.
Status indications according to AUMA classification
SQRVEx 14.2 Control unit: electronic (MWG)
Figure 58: Torque
allows to select the unit displayed (in percent %, in Newton metre
The push button
Nm or in pounds per footft-lb.
Figure 59: Units of torque
100 % indication equals the max. torque indicated on the name plate of the actuator.
Example: SA 07.6 with 20
100 % corresponds to 60 Nm of nominal torque.
50 % corresponds to 30 Nm of nominal torque.
Multiport valve positions (S0017)
For activated multiport valve function, the display S0017 above the position setpoint
E2 indicates a second bar chart showing the selection positions (valve connections).
Positions (P1, P2, ...) are indicated by a black triangle: . In STEP mode, positions
can be selected and approached in selector switch position LOCAL using
buttons. Both the positions as well as the current position setpoint E2 are displayed
in degrees.
Figure 60: Status indication for multiport valve (example P4 = 180°)
P
(P1, P2, ...) selected position (1, 2, ...)
(
) no position selected
E2
Actual position value
These indications are available if parameter Diagnostic classific. M0539 is set to
AUMA.
Warnings (S0005)
If a warning has occurred, the display shows S0005:
the number of warnings occurred
a blinking question mark after approx. 3 seconds
60 Nm.
Indications
push
51
Advertisement
Table of Contents
