Table of Contents
Advertisement
S-curve white led light symbolizing "breathing".
1
Cooldown Mode - Blue Light
In cooldown mode, the printer starts to cool down in a controlled manner.
Refill is allowed during cool down.
When the temperature reaches a predefined allowed chamber temperature the next state is applied.
Finished Printing Mode - Green Light
In finished printing mode the printer is cooling the internal electronics and is indicating that the user is allowed to interact.
Refill and open hatch is allowed.
When the user pushes any button the next state is applied.
Powder Refill Needed - Yellow Light
When the powder level is low, this is indicated on the WeMote display and the color yellow is displayed.
This is not the same warm tone as in preparing.
3D Systems, Inc.
21
p/n 74-D001, Rev. A
Advertisement
Table of Contents
