Table of Contents
Advertisement
7
LIGHT INDICATORS AND DISPLAY
Standby Mode - No Light
In Standby mode, the machine is, by the user, considered as turned off.
That means that the printer is quiet, no lights are shining and no indication is shown.
There is no interaction.
Ready Mode - Warm White Light
The machine spins up its internal systems and the light turns on.
The WeMote turns on and the machine is now READY to interact and prepare for printing.
1
2
White led light when the powder level is okay. When the powder level is low, the lights turn yellow.
Preparing Mode - Warm Yellow Light
In preparation mode, the machine is starting to home the different mechanical components, warming up the different thermal
components to their pre-heat value and after that, the printer starts to build up a print bed.
Indication is shown on the WeMote display and LED lights.
1-2
Abort - Go to cleaning mode allowed.
Printing Mode - Pulsing White Light
In printing mode, the machine is printing and no interaction is allowed.
During the printing state, the indication lights are pulsating slowly in white.
When the printing is finished the next state is applied.
3D Systems, Inc.
20
p/n 74-D001, Rev. A
Advertisement
Table of Contents
