Tesla RoboStar iQ400 Plus Manual page 16

CHARGING STATION
1 Dust bag
2 Power connection indicator
3 Charging connectors for the
vacuum cleaner
REMOTE CONTROL
BEFORE FIRST CLEANING

Insert the batteries into the remote control, making sure to observe the correct polarity.

Install the side cleaning brushes, left and right.

Remove the two foam stops located on the side of the robotic vacuum cleaner bumper.

Before starting cleaning, prepare the room so that there are no objects left on the floor that could
hinder the operation of the robotic vacuum cleaner (larger papers, cables, stickers, small objects,
inappropriately placed carpet, etc.). Move chairs and other larger objects away so that the robotic
vacuum cleaner can easily reach hard-to-reach places.

Also remove objects that can damage the operation of the robotic vacuum cleaner.

Direct sunlight can cause reduced sensitivity of the robot vacuum cleaner's infrared sensors,
4 Hole for emptying the dust container of the vacuum cleaner
5 Power cable
1
2
3
4
5
6
7
8
SMART (intelligent) cleaning
Start/Stop cleaning
Scheduled cleaning
Display
Changing the cleaning mode
Direction buttons
Time setting
Return to the charging station