Troubleshooting - Strong SRT 32HC4043 User Manual

Led tv with dvb-t2/c/s2
Hide thumbs Also See for SRT 32HC4043:
Table of Contents

Advertisement

6.2.2 Play music
Press INFO or OK to display/exit from the menu bar (Fig. 7). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next
Press
u
 
to highlight the corresponding icon on the control bar, and then press OK. The TV will response accordingly.
t
u
Fast Forward/Fast Reverse
Repeat
Highlight the icon and press OK. You can select 3 different modes: None to disable the function, 1 to repeat one track only and
All to repeat the entire list once it is finished.
Information
Highlight the icon and press OK to check the information of the playing music.
NOTE:
- If one (or more) file(s) of the play list is selected, the buttons 7 8 will play only selected files.
- This menu only shows supported files.
- Files with other file extensions are not displayed, even if they are saved on the same USB storage device.
- An over-modulated mp3 file may cause some sound distortion during playback.
- This TV supports lyrics display (in English). The maximum number of characters per line is 48.
- The file name of music and lyrics must be the same in order to display lyrics while the music is playing.
- If you want to show the associated lyrics on the screen with the music, you must store these in the same folder using the
same file name with ".Irc" file extensions.
6.2.3 Browse photos
Press during viewing INFO or OK to display/exit from the menu bar (Fig.8). Press the USB control buttons on the remote control to do relevant
operations.
Play & Pause/Stop/Previous/Next
Press
u
 
to highlight the icon on the control bar, and then press OK. The TV will response accordingly.
t
u
Repeat
Highlight the icon and press OK. You can select 3 different modes: None to disable the function, 1 to repeat one track only and
All to repeat the entire list once it is finished.
Highlight the button and press OK to check the information of the shown photo.
Info
Rotate
Highlight the icon in the menu bar and press OK to rotate the picture 90 degrees clockwise or counter clockwise.
Zoom In/Zoom Out
Highlight the icon on the menu bar and press OK to zoom in or zoom out of the image.
When the image is magnified, use this function for convenient check. Highlight this icon, press OK, then press
Move View
move the image.
NOTE:
The move function
6.2.4 Browse text documents
Press
 
to select Text in the main menu. Then press
t
u
display by using
 
and confirm with OK. Quit step by pressing OK. Press
pq t
u
6.2.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong.
tv. Search the model number on our website's service support section. If there is an improved software version you can download the file and copy it
to the root of a USB device. Then press
into the USB slot and press OK to update the respective software. Confirm with Yes using
disconnect your device from the main power supply and plug in again.

7.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does
not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website
www.strong.tv.
 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next music file. Press
Press and hold 5 6 for seconds to draw the playing progress as you wish, then press
start playing from the new position.
 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to show the previous or the next picture. Press
is only available when the image is enlarged.
 
to select the drive disk you choose to watch and OK to enter. Select the file you want to
t
u
button to select Software Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device
pq
 
to select return and go back to previous menu.
t
u
 
. When the update is completed, remove the USB stick,
t
u
10
Fig. 7
 2 on the remote control to
u
Fig. 8
 
to
t
u pq

Advertisement

Table of Contents
loading

Table of Contents