Crypted
Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and Encrypted channels
Service Type
Select DTV to search DTV channels only, RADIO to search radio channels only or All for a complete search.
It is recommended to use the default settings.
3.2 DVB-T/T2 installation
Terrestrial Setting
First select the Tune Type by pressing
Press
to continue. Press
q
t
u
start searching.
3.3 DVB-C installation
Cable Setting
Press
to highlight your settings.
pq t
u
Scan type
You can select Network Scan or Full. (Default Network Scan for quick search advised)
NOTE:
Full scan will have a duration of approximately 20 minutes, depending on your cable network.
Frequency
Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Network ID
Please enter (with 0 ~ 9) the used Network ID from your provider.
Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
Symbol
NOTE:
Please check the settings for your cable system used by your provider!
Press OK to continue.
Crypted
Select FTA Channels to search Free-To-Air channels only or All Channels to search FTA and encrypted channels
to highlight the country that you want to install, then press OK to start searching.
Press
pq t
u
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers information on broadcasted programmes.
You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use
EXIT to stop and return to viewing modes.
Then press the COLOUR BUTTONS for entering the required settings.
GREEN
Access extra info of programme
YELLOW
Open the reminder setting over view
BLUE
Set reminder of selected programme.
5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use INPUT to select another source.
5.1 Menu control (DTV mode)
Press MENU to enter the main menu. Press
5.2 Picture menu
Picture Mode
Select the automatic picture control mode. Available choices are Dynamic, Standard, Mild and User.
Colour Temperature
Select the overall colour tone of the picture. Available choices are Cool, Medium, Warm and User.
Aspect Ratio
Select the aspect ratio (display proportions) according to your video signal type or preference. Available choices are Auto,
4:3,16:9, Zoom1 and Zoom2. Note: Some options may not be available under some sources.
Noise Reduction
Eliminates noise in the picture. Available choices are Off, Low, Middle and High.
In the User mode, settings can be changed for Brightness, Contrast, Colour and Sharpness.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If Picture Mode is set to Personal you are able to change the following settings
Press
to select an option, then press
pq
to select DTV, ATV or DTV+ATV (DTV to search digital broadcasts and ATV to search analogue broadcasts).
t
u
to select All Channels or FTA Channels. Press
to select an item. Press
t
u
to adjust.
t
u
to highlight the country that you want to install, then press OK to
pq t
u
and OK to select the submenus. Press MENU to exit the item.
pq
6
to select a programme. Press
pq