Table of Contents
Advertisement
Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Brightness
Adjust the optical fibre output of the entire picture, it will affect the dark region of the picture.
Colour
Adjust the saturation of the colour based on your own preference.
Tint
No function
Sharpness
Adjust the peaking in the detail of the picture.
5.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
to select Colour Temperature, then press OK to enter a sub-menu. Press
Press
pq
Warm).
Cold
lncrease the blue tone for the white.
Normal
Increase the neutral colours for the white.
Warm
lncrease the red colour for the white.
5.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press
sub-menu.
Off
Select to turn off video noise detection.
Low
Detect and reduce low video noise.
Middle
Detect and reduce moderate video noise.
High
Detect and reduce enhanced video noise.
Default
Set as Default.
5.3 Sound menu
Sound Mode
Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User.
Bass
Adjusts the lower frequency of the sound.
Treble
Adjusts the higher frequency of the sound.
Balance
Control the sound balance between the right and left loudspeaker (earphone).
Auto Volume
Adjust the volume corresponding to the input audio level. Options are On and Off.
Surround Sound
Turns on the Sound Retrieval System.
AD Switch
Turn on the Audio description, you can activate the setting of AD volume. When turn on the audio description, a narrator will
describe what is happening on the screen for blind or visually impaired viewers. (Only if available in DTV mode.)
S/PDIF Mode
If you have connected S/PDIF output to digital home audio system. You can select "Auto" to output Dolby audio automatically. If
channel have this audio channel.
5.4 Channel
Press MENU to display the main menu. Press
menu.
Press OK to adjust. After finish your adjustment, press OK to save and return to the previous menu. Below items depend if they are available of select
input source. Use INPUT to select another source.
5.4.1 Auto Tuning
Press
to select Auto Tuning, select the Scan Type and proceed with OK.
pq
5.4.2 Dish Setup
If you use DVB-S/S2 as input source, the Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port and LNB type. Afterwards
you may start the Auto Tuning or Manual Tuning by selecting with EPG button the wanted transponder.
5.4.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press
Press
to select a Channel No., and then press OK to start the search. The search stops when a programme is found and this programme will be
t
u
stored in the current channel position. If you want to stop the search, press MENU.
to select Channel in the main menu. Press
t
u
to select DTV Manual Tuning. Then press OK to enter the sub-menu.
pq
7
to select the relevant picture effect (DEFAULT: Cold Normal
pq
to select Noise Reduction, then press OK to enter a
pq
to select the option you wish to adjust in the Channel
pq
Advertisement
Table of Contents
