Filament Loading - Flashforge Inventor Quick Start Manual

Print
1. Tap [Tools].
Load Left
Unload Left
Load Right
Unload Right
3. Tap [Load Left].
Loading begins, push filament vertically into
extruder, and press [Done] when you see
filament come out of extruder
L Extruder
5. Once heated, filament will be drawn through the extruder. Continue extruding until the extruder
provides a steady flow of filament. Tap [Done], go back. Tap return arrow to go back to home
screen.
Attetion: If extruder can not unload in a long time, please check if you have inserted filament
into the bottom of extruder.

Filament Loading

Preheat
100%
230
℃ / 230℃
Done
Filament Level
Setting Status
2. Tap [Filament].
L Extruder
4. Extruder starts to heats.
14
Home Manual
About
16%
25
℃ / 230℃
Cancel