Table of Contents
Advertisement
Product Manual
USB Connections
To establish a USB connection:
1.
Connect a Thunderbolt™ / USB (Type-C) cable from Port A (port with computer icon) on the
back of the Pegasus M4 to the USB (Type-C) port on your computer.
2.
If the Pegasus M4 is plugged into a power source and the computer is running, the Pegasus M4
will power on and begin to boot up.
You will notice the following:
•
The Power Button LED is lit orange at first, then blue.
•
The drive carrier Power / Status LEDs is lit blue.
•
The Thunderbolt™ Link LED for the port connection is lit blue.
•
The "Pegasus M4" storage drive icon appears on your desktop. This indicates the Pegasus
M4 is ready for use.
9
Installation and Setup
Advertisement
Table of Contents
