Optional Equipment - H&S 5226 Operator's Manual

OPTIONAL FEATURES & ACCESSORIES
NOTE: The optional features & accessories listed in this chapter, are shipped with separate
instruction for installation, as applicable.
1000 RPM PTO DRIVE
The 5220 Top Shot can be ordered from the factory with an optional 1000 RPM drive.
540 RPM PTO DRIVE
The 5226 Top Shot can be ordered from the factory with an optional 540 RPM drive.
AUGER SPEED OPTIONS
Several different drive sprockets are available to change auger speeds to various spreading needs.
Sprockets are available as service parts.
EXPELLER SPEED OPTIONS
Several different drive sprockets are available to change expeller speeds to various spreading needs.
Sprockets are available as service parts.
SAFETY CHAINS
An appropriate-sized safety chain to accommodate the potential weight of the loaded Top Shot is available.
ELECTRONIC SCALES & COMPONENTS
Model: Digi-Star GT400
An optional factory installed Digi-Star GT400 scale is available for accurate
weight measurement for each load spread. The 5-point weighbar system
features 3 modes, Net, Tare and Gross.
Model: Digi-Star NT460
An optional factory installed Digi-Star NT460 scale system is
available for accurate weight measurement and displaying
actual tons per acre. The Indicator has GPS capability and
stores pounds of manure spread on individual fields.
Hydraulic Deflector
An optional hydraulic cylinder with hoses is available
in place of the manual lever control.
DISCHARGE DEFLECTOR ELECTRIC
VALVE
An electric valve for the discharge deflector hydraulic
cylinder is available as an option if there are not 3
remotes available on the tractor. This valve is combined
with one of the hydraulic circuits and operated with a
switch to change operation between the 2 operations.
-30-