Lusing Menus - Barco R9840700 Quick Reference

Shooting a Document
Shooting a Document
Continued
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Adjust the focus by pressing
8
the FOCUS 8 and 9 buttons
simultaneously.
The focus is adjusted automatically.
For fine adjustment, use either the FOCUS 8 or
9 button.
Each time you lightly tap the button, fine adjust-
ment is performed. Repeat until correct focus is
obtained.
FOCUS 8/9
buttons
FOCUS
AF
[ The base of this unit may become hot during usage.
[ Do NOT block the ventilation holes on the right side and bottom of the unit. The tempera-
ture inside the unit may become extraordinarily high, causing fire.
Operate
[ Avoid any shock to the glass parts, such as the lens and fluorescent lamps, or the plastic
with care
parts of the document stage. The glass or plastic may be broken, causing injury.
When changing the material (Freeze function)
Use the Freeze function to smoothly change the material. When the Freeze function is active, the image remains on the screen even
if you remove the material from the document stage. While the Freeze function is active, the freeze mark
upper left corner of the screen. The Freeze function is enabled only when a monitor or a projector is connected to the RGB connector.
The Freeze function is invalid for the VIDEO and S-VIDEO outputs.
1
Press the FREEZE button.
Press the button before removing the material. The image will be frozen on the screen.
2
Change the material.
The original image stays on the screen.
3
Press the FREEZE button again.
The Freeze function is deactivated, and the image of the new material appears on the screen.
20
**BARCO 018-037(E) 20-21
Adjust the brightness by
9
pressing the BRIGHTNESS +
or – button.
The image
The image BRIGHTNESS
becomes
becomes dark.
bright.
– +
For a clear image
Press the TONE button. The contrast of
the image is emphasized, making the
image clear.
To use the Pen function
You can draw lines on the screen using
a mouse for smooth presentations.
( p.33)
Caution
is displayed at the
Using Menus
Using Menus
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For efficient use of this unit, the following 14 menu icons are provided.
There are two methods for displaying and operating the menu icons; using the operation panel and using a mouse.
For details, see pp.22~23.
Lights Gain WBset Tone Reverse Color
arp- Iris
ness
A/M
When displaying the menus on a submonitor:
The menu display on a submonitor connected to the VIDEO or S-VIDEO monitor is as follows:
The monitor for displaying the menus can be specified using the Setup menu. (
2000.7.18, 8:19 PM
Lights Gain WBset Tone Reverse Color Sharp- Iris Fit/ Change Save to Save to SXGA Test
ness A/M Over Pointer card Server /XGA
Iris
Sharp-
ness A/M
Fit/ Change Save to Save to SXGA
Setup
Over Pointer Card Server /XGA
p.29)
Continue
21