5. INSTALLATION ADJUSTMENT
Overview
•
Entering the Service menus
•
Starting up the Installation Adjustment Mode
•
Password Protection
•
Overview Installation mode
•
Scheimpflug Adjustment
•
Optical Lens Focusing
•
Electrical focusing
•
Raster Centering
•
CRT Projection Angle Adjustment
5.1 Entering the Service menus
How to enter the Adjustment menus with the RCU?
1. Press the ADJUST key.
The Main menu will be displayed. (menu 5-1)
2. Push the cursor key ↑ or ↓ to select Service menus.
3. Press ENTER to select.
A warning will be displayed. (menu 5-2)
4. If qualified, press ENTER to continue.
The Service main menu will be displayed. (menu 5-3)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-1
How to enter the Adjustment menus with the local keypad?
1. Press the ADJUST key.
The projector displays the General Access Menu. (image 5-1)
2. Use the cursor keys to highlight enter ADJUST.
3. Press ENTER to select.
The Main menu will be displayed. (menu 5-4)
4. Continue as described in How to enter the Adjustment menus with the RCU.
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-4
R5976585 BARCO CINE7 26022003
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following
SERVICE menus
are reserved to,
and to be performed only
by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
Menu 5-2
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-3
5. Installation Adjustment
19