Fuses; Electric Starter Will Not Operate; Battery Will Not Charge; Fuse Replacement - TOHATSU BFT200A Owner's Manual

FUSES

Electric Starter Will Not 
Operate
The 10 A, 15 A, and 30 A main fuses
protect the electric starter relay and
related circuits.
The 30 A main fuse protects the
ignition switch and related circuits. If
this fuse blows, the engine will not
start or run.

Battery Will Not Charge

A 150 A ACG fuse protects the
alternator circuit. If the ACG fuse
blows, the engine will not charge the
battery. Refer to ACG Fuse (p. 97).
TAKING CARE OF UNEXPECTED PROBLEMS

Fuse Replacement

Disconnect the battery cable at the
battery negative (–) terminal before
replacing the f use.
Failure to do so may cause a short
circuit.
Main Fuse
1. Stop the engine.
2. Disconnect the battery.
3. Remove the engine cover (p. 61).
4. Open the junction box cover.
SPARE FUSES MAIN FUSES
(10 A, 15 A, 30 A) (10 A, 15 A, 30 A)
JUNCTION
BOX
COVER
FUSE PULLER
95