Infocenter Advisories - Toro 41393TE Software Manual

button 3 to select the Sub-Area screen
(Figure 77).
2. Use the InfoCenter buttons
perform the following actions:
•
Press button 1 to return to the Home screen.
•
Press button 2 to navigate to the Total Area
screen.

InfoCenter Advisories

Operator advisories automatically display on the InfoCenter screen when a machine function requires additional
action. For example, if you attempt to start the engine while pressing the traction pedal, an advisory displays,
indicating that the traction pedal must be in the N
For each advisory that occurs, there is a condition (e.g., start prevent, engine stopped), an advisory code
(number), a qualifier (the cause of the advisory displayed), and a display text (what the advisory displays as text
on the screen) as shown in
1. Display text
2. Advisory code
Note:
Advisories do not log into the fault log.
Note:
You can clear an advisory from the display screen by pressing any of the InfoCenter keys.
Refer to the following table for all the InfoCenter advisories:
Advisories Table
Condition
Start Prevented
Start Prevented
Start Prevented
Start Prevented
Start Prevented
Engine Stopped
(Figure 77) to
EUTRAL
Figure 78.
Code
2
3
4
5
6
102
•
Press button 3 to change the active sub-area
to the next sub-area.
•
Press and release button 4 to change the
active sub-area to the previous sub-area.
Press and hold the button 4 to reset area
and volume sprayed for the active sub-area.
•
Press button 5 to exit the menu bar.
position.
Figure 78
3. Press any key on the InfoCenter to clear the text from the
display screen.
Qualifier
Pump switch active
Not in N
EUTRAL
Out of seat
Starter engage timeout
Rinse pump active
Out of seat
28
Display Text
To start, turn pump off
To start, return traction pedal to
neutral
To start, must be seated or set
the parking brake
To start, rest starter
To start, turn off rinse pump
Engine stop due to operator out
of seat
g034318