Toro 41393TE Software Manual page 5

Setting the Rate 1 or Rate 2 Value
1. Press button 1 or 2 to navigate to the
2 options (Figure
RATE
2. Press button 4 to select the sprayer
(Figure 6).
3. Press buttons 3 or 4 to set the raise or lower the
sprayer rate (Figure
Note:
You can change the rate faster by
pressing and holding button 3 or 4.
4. Press button 5 to save the setting, exit the
screen, and return to the
Setting the Boost Percentage
The boost rate % is the percentage amount added
to the active rate when you want to spray additional
chemical to a turf area, such as additional herbicide
sprayed at an area of weeds.
Note:
While using the sprayer, at the Home screen
press and hold buttons 1 and 5 simultaneously to
apply boost rate.
RATE
6).
Figure 6
RATE
7).
Figure 7
screen.
SET RATES
Boost is active only as long as you hold buttons 1 and
5, then returns the set rate when you no longer press
1 or
and hold the buttons.
1. Press button 1 or 2 to navigate to the boost-rate
percentage option
g191782
option
2. Press button 4 to select the Boost % setting
(Figure
Note:
10%, 15%, 20%, or 25% increments.
g191794
3. Press button 3 or 4 to raise or lower the boost
RATE
percentage
Note:
rate is activated the sprayer volume is 125% of
the active rate.
4. Press button 5 to save the
boost screen, and return to the
screen.
5
(Figure 8).
Figure 8
9).
You can set the boost percentage to 5%,
Figure 9
(Figure 9).
Examples—if boost %=25%, while boost
BOOST
g191781
g191807
%, exit the
SET RATES