Toro 41393TE Software Manual page 6

Settings
1. To access the
SETTINGS
2 on the
MAIN MENU
Settings option (Figure
Figure 10
2. Press button 4 to select
(Figure 10).
Note:
This screen displays and allows you
to set the Tank, Display, Boom Width, Reset
Defaults, and GeoLink settings.
Tank Settings
1. Press button 1 or 2 to navigate to the
option (Figure 11).
2. Press button 4 to select
11).
This screen displays and allows you to set the Tank
Volume, Low Limit, Low Limit Volume, and Preset
Agitation settings.
screen, press button
screen to navigate to the
10).
sub-menu
SETTINGS
TANK
Figure 11
sub-menu
TANK
Setting the Tank Volume
1. Press button 1 or 2 to navigate to the
VOLUME
g192022
2. Press button 3 or 4 to raise or lower the value
for the volume of chemical in the sprayer tank
(Figure
3. Press button 5 to save the setting, exit the
screen, and return to the
Setting the Low Limit Indicator
1. Press button 1 or 2 to navigate to the
option
g191832
2. Press button 4 to turn on or turn off the limit
indicator for the low tank volume
(Figure
3. Press button 5 to save the setting, exit the
screen, and return to the
6
option (Figure 12).
Figure 12
12).
SETTINGS
(Figure 13).
Figure 13
SETTINGS
TANK
g191833
TANK
screen.
LOW LIMIT
g191831
(Figure 13).
TANK
screen.