Table of Contents
Advertisement
Speed Calibration
Preparing for the Speed Calibration
1.
Press buttons 1 or 2 on the
sub-menu to navigate to the
(Figure
60).
Figure 60
2.
Press button 4 to select Speed calibration option
(Figure
60).
3.
Fill the sprayer tank half full—600 L or 150 US
gal of water
(Figure
Figure 61
Note:
You can cancel the speed calibration
by pressing button 5, A message displays
confirming that you canceled the speed
calibration.
CALIBRATION
option
SPEED
61).
4.
Press button 2 to advance to the next step
(Figure
61).
5.
Mark a starting line on a testing area of turf
(Figure
63).
g192290
6.
Using a measuring wheel, mark off a 45 to 152
m (150 to 500 ft) distance; record the distance
that you measured below
g192303
Note:
A test distance to 92 to 152 m (300 to
500 ft) produces better calibration results.
Entered distance value:
22
Figure 62
Figure 63
(Figure
64).
Figure 64
g192423
g192333
g192349
Advertisement
Table of Contents
