Toro 41393TE Software Manual page 13

Figure 33
4. Press button 3 or button 4 to lower or raise the
boom width value
5. Press button 5 to save your settings and exit the
screen, and return to the
BOOM WIDTH
screen (Figure 33).
Resetting the Default Settings
1. Press button 2 on the
reach the
RESET DEFAULTS
Figure 34
2. Press button 4 to select the
entry (Figure 34).
3. Press button 1 or 2 to select 1 of the following
options that you want to reset to factory setting:
•
Display
•
Flow Calibration
•
Speed Calibration
•
All Others
(Figure 33).
SETTINGS
screen until you
SETTINGS
option (Figure
RESET DEFAULTS
g224287
4. Press button 4 to reset the settings for the
selected option
5. Repeat steps
want to reset
6. Press button 5 to save your settings and exit
the
RESET DEFAULTS
SETTINGS
Setting the GeoLink Option
34).
1. Press button 1 or 2 on the
you reach the
g191706
2. Press button 4 to select the GeoLink entry
(Figure
3. On the GeoLink menu, press button 4 to select
the Yes option or press button 4 to select the
No option, and press the button 5 to save your
settings and exit the menu
Note:
have the optional GeoLink system installed on
the machine.
13
Figure 35
(Figure 35).
3 and 4 for other options that you
(Figure 35).
screen, and return to the
screen (Figure 35).
SETTINGS
option
GEOLINK
Figure 36
36).
(Figure
Turn on the GeoLink setting only if you
g191707
screen until
(Figure 36).
g191703
37).