Table of Contents
Advertisement
6.
Insert the floppy disk, then press Enter.
7.
Select Initio INIC162x S-ATA RAID Controller
For Windows XP/Server 2003, then press Enter.
8.
Press Enter to finish driver installation, then follow
the on-screen instructions to complete the Windows
installation.
When Windows resumes, go to Initio SATA RAID
Manager GUI on page 11 and install the RAID utility.
For An Existing Installation
1.
Setup the RAID array prior to driver installation
and boot up to Windows.
2.
At the Found New Hardware Wizard:
XP (w/SP1 or earlier)/Server 2003: continue to step #3
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later):
select No, not at this time, then click Next.
3.
Insert the driver CD, select Install the software
automatically (Recommended), and click Next.
4.
Accept the default entry, then click Next.
5.
Click Continue Anyway, then click Finish.
6.
Repeat steps 2-5.
7.
Click Yes to restart to complete the installation.
When Windows resumes, go to Initio SATA RAID
Manager GUI on page 11 and install the RAID utility.
10
Advertisement
Table of Contents
