Table of Contents
Advertisement
Quick Links
Introducing Your Fast SCSI Pro
Your Fast SCSI Pro is a high performance, Plug-and-Play PCI-bus
master SCSI host adapter which supports connectivity to up to
seven external SCSI devices. These devices include: hard disks, tape
drives, removable/MO drives, optical drives, CD-ROMs, CD-R/
RWs, scanners and more.
Designed for use in PCs and MACs with PCI-bus slots. Your
Fast SCSI Pro supports 32-bit data transfer across the PCI bus at
speeds up to 133 MBytes per second. It supports synchronous data
transfer rates up to 10 MBy/sec, and is fully backward compatible
with all SCSI-1 devices.
The Fast SCSI Pro is designed for adding only external SCSI devices
to your system. It does not include an on-board BIOS to support the
boot-up function; therefore, it must coexist with an IDE or other
hard disk controller.
Key Features and Benefits
• Supports up to 7 external SCSI devices simultaneously
including: jaz/zip drives, SyJet/ezflyer drives, CD-R/RW
drives, scanners, tape drives, MO drives, removable drives,
optical drives, WORM drives, jukeboxes and more
• Supports burst data transfer rates (synchronous) up to 10MB/
sec
• Non-BIOS Fast SCSI-2 host adapter--designed for external
SCSI device connections
• Supports 133MB/sec burst data transfer rate on the PCI bus
• Works with various types of external Fast SCSI-2 devices
including hard disks, tape drives, removable/MO drives,
optical drives, CD-ROMs, CD-R/RWs, scanners, and more
• Full multitasking and multithreading support
• Bus Mastering achieves greater performance than PIO data
transfer method
• Advanced scatter/gather, disconnect/reconnect and tag
command queuing features maximize system performance
04-0177A
Fast SCSI Pro
Quick Installation Guide
1
Advertisement
Table of Contents
Related Manuals for SIIG SC2475
Summary of Contents for SIIG SC2475
- Page 1 Fast SCSI Pro Quick Installation Guide Introducing Your Fast SCSI Pro Your Fast SCSI Pro is a high performance, Plug-and-Play PCI-bus master SCSI host adapter which supports connectivity to up to seven external SCSI devices. These devices include: hard disks, tape drives, removable/MO drives, optical drives, CD-ROMs, CD-R/ RWs, scanners and more.
-
Page 2: Software Installation
• Active termination ensures error-free data transfer • Connector type: - External: One high-density 50-pin System Requirements For PCs: • Pentium-Class computers with one available PCI slot • Windows 3.1x/95/98/98SE/2000/NT4.0 For MACs: G3 or Mac ® computer with one available PCI •... - Page 3 2. Goto the folder "D:\AP-10_20\DOSWIN31" and copy all of the files in that folder (except the "image" folder) onto a floppy diskette. 3. Turn on your computer to boot to the DOS prompt. 4. Insert the floppy diskette you have just made into the floppy drive.
- Page 4 Windows 2000 Driver Installation Windows 2000 will auto-detect and install the correct driver for the Fast SCSI Pro controller. Insert Windows 2000 CD into your CD- ROM drive when prompted. Restart your system if prompted by Windows. Driver installation is complete, the controller is now ready for device connection. Windows NT 4.0 Driver Installation The following instructions will guide you through the installation of Windows NT driver for computer systems that boot from an IDE...
- Page 5 Perform the following steps to install the drives: 1. Start up your MAC computer. 2. Insert the Drivers and Utility CD-ROM into the CD-ROM drive. 3. Double click on "SIIG_SCSI" CD-ROM Icon 4. Double click on "Anubis Extension Installer" program icon 5.
-
Page 6: Using The Utility
Using the Utility The following utilities are located on the "SIIG_SCSI" CD-ROM. If you need further information on the bundled utilities, please refer to the Anubis_Manual.pdf file. a) Anubis Utility v3.07-A: This is a full featured utility that allows you to format, partition, mount, and initialize SCSI devices. b) Anubis Mounter v3.07-A: This utility allows you to mount, unmount, and perform limited configurations on the selected drive or bus. - Page 7 Note The Fast SCSI Pro requires a cable with a male high- density 50-pin (HD50) connector on one end. The type of connector on the other end depends on the external device you plan to connect. If you are connecting more than one device, connect the cables between the SCSI devices in a daisy-chained configuration.
-
Page 8: Return Merchandise Authorization (Rma)
Computer Configuration: ____________________________ Return Merchandise Authorization (RMA) SIIG warrants to the original buyer of the product that the hardware is free of defects in materials and workmanship for a period of five years from the date of purchase. If your product fails to be in good working order during the warranty period, you may return it to SIIG for repair or replacement at SIIG's option. -
Page 9: Product Name
6078 Stewart Ave. Fremont, CA 94538-3152 (510) 657-8688 Fast SCSI Pro is a trademark of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation .Mac is a registered trademark of Apple Corporation. Pentium is registered trademark of Intel Corporation.