GB
5
OPERATION
General safety regulations for handling the equipment can be found on
page 4. Read through before you start using the equipment!
WARNING
Secure the equipment - particularly if the
ground is uneven or sloping.
5.1
Connection and control devices
1
Mains supply switch
2
Switch, precise control
3
Switch, coarse control
4
Indicator lamp, power supply ON
5
Orange indicator lamp, overheating
6
Digital instrument V/A
5.2
Overheating protection
A thermal overload cutout protects against overheating. The cutout resets automatically
when the unit has cooled.
ba51e
7
Connection for return cable (-), high
inductance
8
Connection for return cable (-), low
inductance
9
Connection for welding current cable (+)
10
Connection for control cable for wire feeder
11
MCB
- 11 -
© ESAB AB 2011