Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
1. Platform / Off / Ground Selector Switch
Movement Control from the Platform Controls
Control Circuit Off Position
Movement Control From The Ground Controls
2. Emergency Stop Switch.
Depress the switch to stop all functions. The
switch must be turned clockwise to restore the
machine's functions.
3. Function Enable Switch.
Must push and hold to operate any functions.
4. Jib Up / Down Switch.
Move the switch UP to RAISE the jib. Move the
switch DOWN to LOWER the jib.
5. Mast Up / Down Switch.
Move the switch UP to RAISE the mast. Move the
switch DOWN to LOWER the mast.
6. Turntable Slewing Switch.
Move the switch to the RIGHT to slew the turntable
to the RIGHT or to the LEFT to slew the turntable
to the LEFT.
7. Charger Indicator
(Depending on equipment, see § 4-6)
3-2
1. Platform /Off/Ground Selector Switch
2. Emergency Stop Switch
3. Function Enable Switch
4. Jib Up / Down Switch
5. Mast Up / Down Switch
6. Turntable slewing Switch
7. Charger Indicator
8. Circuit Breaker
9. Overload indicator
10. Battery Filling Pump Switch
Figure 3-2. Ground Control Station
8. Circuit Breaker.
Protection of the control circuit.
9. Overload Indicator
Flashing red light indicator.
10. Battery Filling Pump Switch.
Depress the push button to activate the battery
filling pump.
(See Maintenance section for further instructions).
– JLG Lift –
31210005
Advertisement
Table of Contents
