Extech Instruments MS420 User Manual page 40

When the sync is Designed Line, the menu is as follows:
MODU
(Modulation)
Line
Line No.
Hold-off
When the 'Hold-off' menu is accessed the screen will appear as below:
Figure 27b: 'Hold-off'
Refer to the Table below for details on the 'Hold-off' mode: (MS420 only)
Function menu
NTSC
PAL/SECAM
Increase
Decrease
menu screen (MS420)
Settings
Description
40
Common video standard (used in the U.S.)
Least common standard (common in
Europe)
The Line value will increase
The Line value will decrease
Set and show the Line value
Move to the Hold-off menu
MS420-en-US_V6.0 2/23