Table of Contents
Advertisement
USB
/ S
MASS STORAGE DEVICE
AVE WAVEFORM DATA
Connect a USB mass storage device to the USB port on the meter using the supplied
cable. Press the COPY key. The current waveform data will then be saved (the file
names are automatically sequenced (WAVE1.bin, WAVE2.bin, etc.). Now connect
the USB Mass Storage device to a Personal Computer and use the supplied software
to transfer and manipulate the stored data.
Note: Refer to the HELP utility in the supplied software for further instructions.
27
MS420-en-US_V6.0 2/23
Advertisement
Table of Contents
Need help?
Do you have a question about the MS420 and is the answer not in the manual?
Questions and answers