Crankcase Breather; Crankcase Breather - Filter Element Replacement - MTU 12V4000Gx5S Series Operating Instructions Manual

9.3 Crankcase Breather

9.3.1 Crankcase breather – Filter element replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 10–60 Nm
Engine oil
Filter insert
Sealing ring
Locknut
Disk
WARNING
Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Crankcase breather – Filter ele-
ment replacement
1. Release lines (1) from distributor (2).
2. Remove screws (3) on vent lines (4) and re-
move vent lines with O-rings.
3. Unscrew screws (5) with washers.
4. Remove diaphragm housing (6).
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
MS15065/01E 2019-01 | Crankcase Breather | 197
Part No. Qty.
F30452769 1
2