Maintenance And Storage - Feider Machines FPEP1200CPC Instruction Manual

Place delta pad in front of machine body, matching the two holes and square shaft shape.
Press machine down till the quick assemble button automatically lock the pad.
NOTE: To reinstall the rotary pad, switch off and unplug the tool. Follow the same step as above.

4. MAINTENANCE AND STORAGE

a. Carbon brush replacement
Included in the accessories there is a pair of carbon brush. When the carbon brush almost worn it should
be replaced with a new one. Use screw driver to open carbon brush cover, move tension spring to side,
and then pull out of the old carbon brush. Replace to new one and close the carbon brush cover.
11