Subscribe to Our Youtube Channel
Related Manuals for Feider Machines FPV260
Summary of Contents for Feider Machines FPV260
- Page 1 ORIGINAL INSTRUCTIONS >EN PLASTER SANDER FPV260 CAUTION: Read the instructions before using the product.
-
Page 2: Table Of Contents
CONTENTS SAFETY INSTRUCTIONS PRODUCT DESCRIPTION SPECIFICATION REPLACEMENT OF PARTS AND MAINTENANCE DISPOSAL DECLARATION OF CONFORMITY WARRANTY PRODUCT FAILURE WARRANTY EXCLUSIONS... -
Page 3: Safety Instructions
1. SAFETY WARNINGS GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care a) Do not force the power tool.
- Page 5 sack (or in the filter sack or extraction system filter) can self-ignite under unfavourable conditions such as flying sparks caused by grinding metals. Particular hazards are caused if the sanding dust is mixed with paint, polyurethane residues or other chemical substances, or if the sanded object is hot after long working periods.
-
Page 6: Product Description
2. PRODUCT DESCRIPTION 1) Front hand grip 4) On/Off Switch 7) Dust box 2) Speed dial 5) Rear hand grip 8) Paper clamping lever 3) Paper clamping wire 6) Dust extraction port 9) Backing pad 3. SPECIFICATION Rated voltage 230-240V~, 50Hz Rated power 260W Rated no-load/ no:... -
Page 7: Use
4. USE INTENDED USE The sander is intended for dry sanding of wood, metal, plastic, plaster and painted surfaces. The sander is not suitable for commercial use. The device is designed for use by adults. Adolescents over the age of 16 may use the device only under supervision. - Page 8 If the dust collection box is full, you can remove it from this tool and open the cover of box, empty dust, wood bust, etc. in the body, finally clean the dust collection box. WARNING: Please empty the dust collection box frequently, after completion of sanding and before storing the sander.
-
Page 9: Replacement Of Parts And Maintenance
Any finish or resin on wood may soften from frictional heat. This will cause the material to rapidly clog the sandpaper, rendering it useless. A heat gun will work much better to remove paint before sanding. Do not allow sanding on one spot too long, as the sander’s rapid action may remove too much material, particularly when using only one corner of the pad, making the surface uneven. -
Page 10: Declaration Of Conformity
BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below: Plaster sander Model number: FPV260 S/N: 20220720509-20220721008 Complies with the provisions of the Directive « machinery » 2006/42/EC and national laws transposing it:... -
Page 11: Warranty
8. WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. It can be extended by one year if the user subscribes to website of myswap. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. -
Page 12: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 13: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 14 BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC 2022...
Need help?
Do you have a question about the FPV260 and is the answer not in the manual?
Questions and answers