Table of Contents
Advertisement
4.4 Polishing
Before polishing, thoroughly clean the device, in particular the edge of the brush (4) and the protective and suction
hood. Dirt and dust residue can influence the result of polishing.
- Mount the sanding plate (10).
- Before placing a new foam disc, remove dirt and dust from the sanding plate with a brush.
- Place the foam disc in the center of the sanding plate and press it firmly.
4.5 Diamond wheel
Use this wheel to sand walls and concrete surfaces. This function allows you to easily sand the corners. It
can also be used for the removal of paints, stains and other coatings. When using, wear protective
equipment (glasses, safety mask, and protective gloves). There is no need to press down firmly on the
machine during use; you may have poor operating results.
5.
MAINTENANCE AND STORAGE
Keep your tool on a regular basis. This will keep your tool in good working order and extend its lifespan.
Do not use abrasive or corrosive agents to clean the tool. These types of products damage your tool.
Do not make any repairs by yourself. Repairs and inspections should be carried out by a competent person or an
authorized service center (please contact your dealer).
a. After each use
Check the condition of the accessories and the tool body (cleanliness, wear, damage, etc.). If you notice any
damage, wear or malfunction, do not use the tool and take it to a qualified service for inspection and repair.
b. Servicing
No specific maintenance is required by the user. After each season, please bring the tool to an authorized
service center for general machine maintenance.
c. Spare parts
You can order spare parts directly from our service center. Please place your order according to the type of
machine and the part number indicated in the explosion drawing.
d. Storage
-
After use and cleaning, please keep your tool.
-
Store the tool in a clean, dry place, preferably in its box.
-
When transporting and storing, always put the protective cover on the blade.
-
The tool should be stored away from children and pets.
-
Avoid exposing the tool to direct sunlight.
6.
DISPOSAL
Electrical products should not be discarded with household products. According to the European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into national
law, electrical products used must be collected separately and disposed of at collection points provided
for this purpose. Talk with your local authorities or dealer for advice on recycling.
13
Advertisement
Table of Contents
