Related Manuals for Feider Machines FPEP1200CPC
Summary of Contents for Feider Machines FPEP1200CPC
- Page 1 ORIGINAL INSTRUCTIONS DRYWALL SANDER INSTRUCTION MANUAL MODEL: FPEP1200CPC WARNING! Please read this manual before use the tool Feider France ZI – 32, rue Aristide Bergès, 31270 Cugnaux, France Made in P.R.C. 2021...
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY WARNINGS 2. YOUR PRODUCT 3. OPERATION 4. MAINTENANCE AND STORAGE 5. DISPOSAL 6. CE DECLARATION 7. WARRANTY 8. P R O D U C T FA I L U R E 9. WA R R A N T Y E X C L U S I O N S... -
Page 3: Safety Warnings
1. SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool 1) Work area a) Keep work area clean and well lit. - Page 4 g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
- Page 5 e) The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled. f) Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the arbour hole of the accessory must fit the locating diameter of the flange.
- Page 6 The wheel may either jump toward or away from the operator, depending on direction of the wheel’s movement at the point of pinching. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.
-
Page 7: Your Product
Intended use The Drywall Sander is designed for sanding walls and ceilings that are made of drywall or plaster. The Sander provides a superior finish, and is faster than conventional finishing methods for both new construction and renovation work. Clean-up time is minimized by the use of an external Vacuum Cleaner attached to the sander. -
Page 8: Operation
operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). - Page 9 CAUTION: Failure to use a dust bag rated for drywall dust will increase the level of airborne dust particles in the work area. Continued and prolonged exposure to high concentrations of airborne dust may affect the respiratory system function. d. Starting and stopping Be sure that the disc and the sand paper are well assembled.
- Page 10 Keep the sander in constant motion while abrasive pad is in contact with the work surface. Use a steady, sweeping motion. Stopping the Sander (on the work), or moving the Sander erratically can cause unacceptable swirl marks and unevenness in the work surface. NOTE: Do not allow rotating abrasive pad to contact sharp protrusions.
-
Page 11: Maintenance And Storage
Place delta pad in front of machine body, matching the two holes and square shaft shape. Press machine down till the quick assemble button automatically lock the pad. NOTE: To reinstall the rotary pad, switch off and unplug the tool. Follow the same step as above. 4. -
Page 12: Disposal
b. Maintenance Keep tools clean, clean up debris and dust. Often add in lubricating oil and grease (reducer, bearing) to keep the tool flexible operation. Always check the power cable, plug, switch, so that the tools in good condition. Power tools produced by the company are inspected. If the machine meets some malfunction please bring it to our service agent for inspection and reparation. -
Page 13: Ce Declaration
ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Tel : +33 (0)5.34.502.502 Fax : +33 (0)5.34.502.503 States that the designated below machine: Drywall sander FPEP1200CPC Serial number: 20210515281-20210515780 Developed, designed and manufactured in accordance with the requirements of directives: Machinery Directive 2006/42/EC... -
Page 14: Warranty
7. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 15: Product Failure
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...