Related Manuals for Feider Machines FPG7202P
Summary of Contents for Feider Machines FPG7202P
- Page 1 ORIGINAL INSTRUCTIONS Drywall Sander FPG7202P Instruction manual WARNING: READ THESE INSTRUCTIONS BEFORE USE THIS MACHINE BUILDER SAS 32, rue Aristide Bergès-ZI 31270 Cugnaux, France Made in PRC 2021...
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY WARNINGS 2. YOUR PRODUCT 3. USE 4. MAINTENANCE AND STORAGE 5. DISPOSAL 6. DECLARATION OF CONFORMITY 7. WARRANTY 8. PRODUCT FAILURE 9. WARRANTY EXCLUSIONS... -
Page 3: Safety Warnings
SAFETY WARNINGS General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
- Page 5 Safety instructions for all operations Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive Cutting-Off Operations a) This power tool is intended to function as a sander. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
- Page 6 Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. k) Position the cord clear of the spinning accessory.
- Page 7 e. Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control. Additional safety instructions for sanding operations Safety Warnings Specific for Sanding Operations: a) Do not use excessively oversized sanding disc paper. Follow manufacturers’ recommendations, when selecting sanding paper.
-
Page 8: Your Product
sander provides superior finish and is faster than conventional finishing methods for both new construction and renovation work. Clean-up time is minimized by using an external vacuum cleaner attached to the sander. 2. YOUR PRODUCT a. Description 1. Sanding pad 2. - Page 9 6. Extend handle 7. Delta pad The tool is provided with: - A set of sandpaper (round sanding paper + delta sanding paper) (see below for the characteristics) - 1 screwdriver and 1 Hex key - 1 tube and adaptors for the connection to a collector dust - Clips to attach the supply cord on the flexible tube NOTE: The collector dust/dust bag is no provided with this model.
- Page 10 3. OPERATING INSTRUCTIONS a. Selection of the sandpaper The drywall sander is equipped with 6 pcs of sanding paper (80/100/120/150/180/240). This abrasive is suitable for most applications. 120 and 240 abrasive discs are available for works requiring a smoother finish. According to the material and grinding effect, choose the appropriate sandpaper.
- Page 11 d. Connection to the dust collecting bag It is recommended to connect a dust collection device to the machine. Make this connection as shown in the picture below. You can attach the supply cord on the tube by using the provided clips. NOTE: The collector dust/dust bag is no provided with this model.
-
Page 12: Use
Starting and stopping Make sure that the power supply voltage is the same as that indicated on the sander's nameplate and that the selector switch is off. Connect the sander to the power supply. To start the sander, press its switch to ON (I). Press this switch to turn the machine OFF (O). - Page 13 more precise control. h. Adjustment of the tube size Depending on the different grinding positions, the length of the machine can be adjusted between 1100-1800mm. Turn the lock nut counter clockwise to loosen, pull the hose to Locking nut the correct length and then turn the lock nut clockwise to lock.
-
Page 14: Maintenance And Storage
4. MAINTENANCE If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. Tools should always be clean, clean up debris and dust. Always change the oil (gearbox, bearings) for proper operation. Always check the power cord, plugs, switches to make sure the tools are faultless. -
Page 15: Declaration Of Conformity
DECLARATION OF CONFORMITY BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – France States that the designated below machine: Product: Drywall sander Model: FPG7202P Serial number:20210165656-20210165905 Developed, designed and manufactured in accordance with the requirements of directives: Machinery Directive 2006/42/EC... -
Page 16: Warranty
7. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 17: Product Failure
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 18: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...