Related Manuals for Feider Machines FPG-INDUCTION-1
Summary of Contents for Feider Machines FPG-INDUCTION-1
- Page 1 ORIGINAL INSTRUCTION >EN PLASTER SANDER INSTRUCTION MANUAL MODEL: FPG-INDUCTION-1 BUILDER SAS ZI – 32, rue Aristide Bergès, 31270 Cugnaux, France Made in P.R.C. 2021 WARNING! Please read all safety instructions and advises to lower the risk of injuries.
- Page 2 ORIGINAL INSTRUCTION >EN 1, GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"...
- Page 3 ORIGINAL INSTRUCTION >EN connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Page 4 ORIGINAL INSTRUCTION >EN Safety instructions for all operations Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive Cutting-Off Operations: a) This power tool is intended to function as a sander. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
- Page 5 ORIGINAL INSTRUCTION >EN Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.
- Page 6 ORIGINAL INSTRUCTION >EN e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control. Additional safety instructions for sanding operations Safety Warnings Specific for Sanding Operations: a) Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper.
- Page 7 ORIGINAL INSTRUCTION >EN DESCRIPTION 3, TECHNICAL SPECIFICATIONS Voltage supply： 230-240V~ Power ： 4 00W Frequency 50Hz Speed: 900-2100/min Spindle thread hole： M6 Ø225mm Disc Diameter： N.W: 4.07 kg Sound pressure level Lpa = 89.5 dB(A)；KpA = 3 dB(A) Sound power level Lwa = 100.5 dB(A)； KwA = 3 dB(A) Vibration Main handle: 4,684m/s²...
- Page 8 ORIGINAL INSTRUCTION >EN Information The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another; The declared vibration total value may also be used in a preliminary assessment of exposure.
- Page 9 ORIGINAL INSTRUCTION >EN The following items are furnished with the Drywall Sander. One vacuum hose: 4m long (includes a standard 38mm vacuum cleaner connector on end and a special swivel connector on the Sander end)., with a static dissipating feature to dissipate static electrical charges that are sometimes experienced when recovering drywall dust.
-
Page 10: Speed Control
ORIGINAL INSTRUCTION >EN TO START AND STOP DRYWALL SANDER Make sure power circuit voltage is the same as shown on the specification plate on the Sander, and that the sander switch is OFF. Connect Sander to power circuit. The Drywall Sander is equipped with finger touch switch. Please see as below picture shown: To connect with electric power by press power key, then press ON/OFF key to turn on the machine. - Page 11 ORIGINAL INSTRUCTION >EN SANDING DRYWALL The Drywall Sander has a unique articulating sanding head: the head can swivel in multiple directions, allowing the abrasive pad to conform to the work surface .This enables the operator to sand the top, middle and bottom of a wall or ceiling joint without changing: his position.
- Page 12 ORIGINAL INSTRUCTION >EN foam backed abrasive pad, it is NOT suitable for use as a sanding abrasive. DO NOT USE THE SANDER WITHOUT A PROPER ABRASIVE PAD INSTALLED (to prevent severe damage to the work). 4). Position new abrasive pad to the back-up disc, making sure that the center hole in the abrasive disc is centered on the hub of the back-up disc.
- Page 13 : +33 (0)5.34.502.503 States that the designated below machine: Product: Plaster sander Model: FPG-INDUCTION-1 Serial number: 20210863391-20210863640 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.
-
Page 14: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 15: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...