Table of Contents
Advertisement
operator that are based on an estimation of exposure in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
Wear hearing protection.
3. OPERATION
Before the repair or replacement parts, electric tool accessories, be sure to pull out the plug from
the socket
a. Selection of the appropriate sand paper
The drywall sander is delivered with two set of sander paper: a set for the rotary pad and a set for the
delta pad. They are suitable for most applications. Abrasive discs of 120 grits and 240 grits are available
for situations requiring a smoother finish.
According to the material and the grinding effect, select the appropriate sandpaper.
Material
Pigment
Paint
Filling agent
Interstitial material
Pigment layer drips and convex
Flat bottom material
b. Installation of the sand paper
The rotary pad is installed by default in the tool. Stick a sand paper on the rotary pad. Be sure that the
edges are aligned.
c. Connection with the dust bag collector
Connect the hose to the provided dust bag as show below. When the bag is full, empty it.
Use
Removal of pigment layer
Removal of paint
Grinding bottom pigment (such as finishing bottom)
Removal Brush paint, grinding residues
Removal brushing mark, and residual paint
Good finished sanding for new painting
8
Grit
40
60
80
100
120
180-240
Advertisement
Table of Contents
