Connecting The I.profiler; Plus To An Existing Local Network - Zeiss i.Profiler plus Instructions For Use Manual

Connecting the i.Profiler

network
●
Connect the i.Profiler
network cable.
●
Switch on the i.Profiler
application button in the Power down window to switch to the
Windows desktop (Administrator rights required).
●
Double click on the Network Configurator pictogram on the desktop.
The Network Configuration Tool window opens.
●
Select the Ethernet connection you are using in the Network
Adapter field. The left connection is designated with [00000000],
and the right with [00000001].
●
Enter the new IP address in the IP address field. The first three number
blocks must match those of the network. The last number block is
freely selectable; however, the numbers may not already be assigned.
●
Change the subnet mask in the Subnet Mask field.
●
Press the Change IP button. The message "The static IP was set
successfully." appears.
●
If available, you must also enter the Gateway and DNS Server.
●
You can now close the Network Configurator.
●
Double click the program icon Save Configurations on the Windows
desktop to save the completed configurations. The device will then
restart.
plus to an existing local
plus to the practice network (LAN) using a
plus . After starting the i.Profiler
Installation
plus , use the Close
EN 20_070_0009I v1.5
27